by Lazy3D·VFX
Images © Lazy3D. Used for product review; image policy.
GeoDroplets Plus stands out in the superhive library for covering droplets several ways — simulation, static placement, drawing, and procedural materials — within a single Blender add-on. Version 1.1 added a seed option, a minimum distance between droplets, and a small droplets density multiplier.
GeoDroplets Plus is a Blender add-on from Lazy3D for creating realistic droplets in 3D scenes. It handles droplet simulation with physically accurate droplets and a dripping effect, static droplets that hold their shape for still scenes and product renders, and droplet drawing that places droplets directly onto objects. Long droplets can be simulated or drawn for drips and flowing water.
Beyond geometry, the toolkit applies procedurally generated droplet materials to any surface, backed by a library of realistic liquid materials plus two stylized options. Parameters such as droplet size, density, and gravity are adjustable, and a performance option switches between high-quality and proxy modes. Foam generators add foam through Dense Foam Draw or Light Foam Draw assets, and the interface is built for straightforward navigation.
GeoDroplets Plus works with Blender 4.1 and above, rendering in both Cycles and Eevee, and installs as an extension in Blender 4.2. Simulated droplets are recommended on static objects, since moving objects may not interact as expected, and simulations on high-poly photogrammetry models can give unpredictable results.
🔖Geodroplets Plus: Ultimate Droplet Toolkit is best for adding droplets to surfaces, simulating rain, and visualizing wet objects across product visualization, nature scenes, animation, and concept art.
🔖Geodroplets Plus: Ultimate Droplet Toolkit is completely free to download and use.
GeoDroplets Plus is compatible with Blender 4.1 and above, and in Blender 4.2 it installs as an extension. It supports rendering in both Cycles and Eevee, so its droplets, materials, and foam can be rendered in either engine. Because it targets Blender 4.1 and later, earlier releases fall outside the stated compatibility range. For the current install steps and any newer version support, check the developer's page before setting it up.
GeoDroplets Plus is best suited to static objects when using simulated droplets. Moving objects may not interact as expected with the simulated water effects, so the guidance is to run simulations on objects that stay in place. Alongside simulation, the add-on offers static droplets that hold their shape, droplet drawing applied directly onto objects, and long droplets that can be simulated or drawn. It can also create dynamic droplet effects for animation. For moving geometry, weigh these placement methods against the noted simulation limitation.
GeoDroplets Plus does not support exporting its droplet simulation into another software, so the simulation stays within Blender. If your pipeline depends on moving the simulated result into a different application, plan around that limitation. The droplets, materials, and foam are created and rendered inside Blender using Cycles or Eevee. There is also a note that simulations on high-poly photogrammetry models can produce unpredictable results, so avoiding simulation on very dense meshes helps maintain performance and accuracy.
GeoDroplets Plus includes a comprehensive library of realistic liquid materials plus two stylized options, applied as procedurally generated droplet materials to any surface without complex setups. This means you can add a droplet look to a model through materials rather than only through simulated or drawn geometry. Alongside the material library, you can adjust parameters such as droplet size, density, and gravity, and switch between high-quality and proxy modes to balance render quality against performance.
GeoDroplets Plus is listed as free in this catalog. Licensing terms can change, so check the developer's page on superhive for the current details before you rely on it for a project. The add-on is also offered within the GeoAddons Bundle, which packs GeoDroplets Plus together with GeoMoss Pro, GeoFarmer, and Physical Puddles Pro. If you want that wider set of tools, the bundle groups them, while GeoDroplets Plus covers droplet, material, and foam creation on its own.
Also in VFX for Blender.
by KENKEN
LayerComp is a layer-based compositing add-on for Blender that works in a way similar to After Effects. It composites with AOVs, View Layer, media and more, stacking results as layers rather than adding a single filter over the screen.
by Casey_Sheep
Stylized Water Shaders And Generator is a procedural Blender add-on combining shader-based water materials with Geometry Nodes generators for stylized water surfaces, underwater terrain, and water FX. Everything is procedural, animated, and ready to render.
by Blender Procedural
ImperfectIt! - Instant Realism & Dynamic Weather is a Blender addon that adds material imperfections and dynamic weather effects such as snow, rain, dust, and dirt, working with both Cycles and Eevee.
by Lazy3D
Water VFX Master is a Blender addon for creating water visual effects, with real-time simulators, a waterfall generator, a cascade simulator, and presets you can customize and save to your asset library.
by GhostVertex
The Thunderstorm Add-On builds lightning, rain and clouds inside Blender. Choose lightning presets, generate single flashes, add rain rings and splashes, and light scenes with up to ten point lights driven by each bolt's brightness.
by Mk3dLab
Fluid Painter is a Blender add-on that uses Geometry Nodes to paint fluids over any 3D surface with a curve. It ships with 30+ presets compatible with Eevee and Cycles.
by Alt Tab
Alt Tab Easy Fog adds volumetric materials to Blender, with more than 35 presets and one-click automatic fog for atmospheric depth and lighting effects. It's compatible with Blender 4.0 through 4.5.
by antoine bagattini
Baga Rain Generator adds rain to Blender scenes using geometry nodes, affecting only surfaces exposed to the rain. It includes a procedural rain shader generator that overlays onto existing materials.
by CGMatter
Camera Tracker 6 is a Blender add-on that uses photogrammetry to produce automatic camera and tripod solves. It also handles rotomation, variable focal length, dense point clouds, pinning, undistortion, and object tracks.
by Alt Tab
Alt Tab Easy Fog 2 is a Blender addon for adding realistic volumes like fog, smoke, and godrays. It bundles over 50 procedural materials, more than 100 VDBs, and a range of abstract shaders.
by LIGHTARCHITECT
Khaos: Ultimate Explosion/Destruction Add-On brings explosion and destruction tools to Blender, bundling two versions—KHAOS Detonator for procedural mesh explosion systems and KHAOS Legacy for smoke, debris particle effects and rigid body fracture tools.
