by FingShop·Workflow
Illustrative cover generated by AnyPlugins — no product screenshot available.
V-Tile Pro earns its place in the superhive library by pairing tiling removal and material blending in one add-on, both non-destructive and driven by real-time sliders.
V-Tile Pro is a Blender add-on built around two texturing modes. Anti-Tile removes visible repetition from a textured material: select the material, choose one of 18 presets or use auto-detect, then click Apply V-Tile. It works with existing node setups without altering them, and the effect can be removed at any time to restore the original material.
The Material Mixer, added in v2.0, blends two materials into a single hybrid. Pick Material A and Material B, click Create Mix, and adjust sliders to control the blend amount and scale. Blending is height-aware, so peaks take one material and valleys take another, and finished mixes can be saved to the Asset Library.
Both modes are non-destructive and update live in the viewport, with real-time sliders for adjustment. V-Tile Pro works in Eevee and Cycles and covers presets for Fabric, Wood, Stone, Metal, Architecture, and Organic surfaces.
V-Tile Pro is best for environment artists, ArchViz professionals, game asset creators, product designers, and students working with textured materials in Blender.
V-Tile Pro is completely free to download and use.
V-Tile Pro lists compatibility with Blender versions 4.0 through 5.2 and is registered as a Blender extension of the add-on type. Both of its modes are accessed from Blender's Shader Editor. If you are on a version within that 4.0 to 5.2 range, the add-on should install and enable normally. For versions outside that range, check the developer's page before installing, since support beyond the listed range is not stated.
V-Tile Pro installs through Blender's add-on system. Download the V-Tile .py file, then in Blender go to Edit, Preferences, Add-ons, and choose Install. Select the file and enable V-Tile Pro from the list. To open the tools, go to the Shader Editor, press N to reveal the side panel, and switch to the V-Tile tab. From there you can reach both the Anti-Tile and Material Mixer modes. The steps follow Blender's standard add-on installation flow.
V-Tile Pro works in both Eevee and Cycles, the two render engines listed for the add-on. Its Anti-Tile mode and Material Mixer produce materials that update live in the viewport, so you see changes as you move the real-time sliders. Because it operates on standard material node setups non-destructively, the materials it creates are supported in projects rendering with either engine, and you are not locked to one of them.
V-Tile Pro is non-destructive. Its Anti-Tile mode works with your existing node setups rather than replacing them, and you can remove the effect at any time to restore the material to its original state. This means you can apply tiling removal, adjust it with the real-time sliders, and back it out without leaving changes behind. The Material Mixer similarly blends two materials into a hybrid you can tune with sliders, and finished mixes can be saved to your Asset Library.
V-Tile Pro is listed here as free and is distributed under the GPL license. For current licensing terms or any purchase options, check the developer's page, since these details can change over time. The add-on is published as version 2.0, which is when the Material Mixer mode was added alongside the original Anti-Tile functionality. Both modes are included in that release, and the add-on is described as lightweight and stable for daily use.
Also in Workflow for Blender.
by SMArchviz
Blender Themes Pack1 is a collection of five UI themes for Blender from SMArchviz, letting you change the look of the interface with the Zion, Limon, NeonBlue, Zion Clean, and BlenderClear presets.
by INSDesign
Node Preview Switcher is a Blender add-on for the Shader Node Editor that automatically connects the active or modified node to the material output, then reconnects nodes to their original state after a user-defined delay.
by Haggets
Retargify is a Blender plugin that overhauls Rigify, streamlining rig setup and animation while keeping armature structure intact for compatibility with game engines and other software through a non-destructive workflow.
by sum studio
Simple Colorizer is a Blender add-on for coloring mesh faces, aimed at prototypes and low poly work. It offers 8 colors and 8 brightness levels applied through a panel in the 3D View.
by Blender.Fun
Parent To Nearest Bone is a Blender add-on that parents objects to the closest bone with a single click. It offers two parent modes and works from the armature properties panel.
by Salt Media
BlenderAe2 by Salt Media transfers 3D data and objects between Blender and After Effects in both directions, covering vertices, 3D layer transforms, camera data and layer synchronization.
by MACHIN3
Machin3Tools is a continuously evolving collection of tools and pie menus for Blender, gathered in a single customizable package. It ships in two base variants, Prime and DeusEx, with the DeusEx variant adding more advanced tools.
by MikhailRachinskiy
3D Print Toolbox is a Blender add-on with utilities for 3D printing. It analyzes mesh volume and surface area, checks and fixes geometry, hollows shapes, aligns models to the print bed, and exports to STL, PLY, and OBJ.
by glukoz
UVPackmaster 4 is a UV packing engine for Blender that packs UV maps on the CPU and GPU, using the Cuda and Vulkan APIs, and can run on the CPU and all system GPUs at once.
by MMD
MMD Tools is a Blender add-on for editing MikuMikuDance (MMD) models. It handles importing and exporting model, motion and pose data, along with chopping and joining parts, plus rigid body, material and motion editing.
by HaughtyGrayAlien
SimpleBake brings PBR and traditional texture baking to Blender from a single panel. Select objects, choose maps, and bake — no special node groups or new workflow, working with whatever materials you've already built.
